Click on item to jump to product information and ordering or scroll page for our full product line

Compact 279-S
$162 includes shipping

Travel Mate II

$112 includes shipping

Top Draw 2912-S
$195

Choice of BLACK or FLAT BLACK,

Limited edition PINK while supplies last

Desk Mate 2597-S
$200

Hide-Away 3912-SH
$279.00

Slide-Away
10123-S $289

Quick Vault 41214-S
 (wall safe)  $285.00

Rifle Case 31242-SA
$359

Closet Vault II 51653-SA
$595

Questions

The Compact and the Travel Mater ship free to US 48. Others will have shipping added in the shopping cart for ground UPS or FedEx.

Shipping charges to Hawaii will be at least $65 and possibly much more on heavier products because we had to discontinue ground shipments to Hawaii because the trucks kept sinking.  Email support@sellcom.com for a shipping quote to Hawaii.

Note: Overnight shipping on these products, because of their weight will be substantially higher than the shopping cart calculated overnight shipping charge.

Just call

800-SELLCOM
(800-735-5266)

Have a question?
 

  V-Line Compact 279-S

Inner dimensions:  8½" x 6½" x 1½”
Outer dimensions? 9½" x 7¼" x 2"
 

Five button mechanical lock for quick access with 1081 possible combinations.
Top opening security case with classic slim design.
3/8" thick steel lock block welded to cover guides and adds strength to the lock bolt.
Elongated hole in the back allows a cable or pad lock to be used to secure the case to most any surface enabling the case to be transportable.
Foam lining on top and bottom.
Sturdy fabricated steel construction with pry resistant clamshell design.
Available in textured semi-gloss black powder coated finish.
Continuous hinge is welded on one end to prevent pin removal.
Material 18ga steel
Accented with silver logo. Ship weight 5 lbs

This is a California-approved firearms safety device that meets the requirements of California Penal Code Section 12088 and the regulations issued thereunder.

Compact 279-S

includes shipping
 

  V-Line Top Draw 2912-S

Inner dimensions 11¾" x 8¾"
Outer dimensions 12" x 9" x 2½"
 

Five button mechanical lock for quick access with 1081 possible combinations.
Top opening security case with classic slim design.
3/8" thick steel lock block welded to cover guides and adds strength to the lock bolt.
Prepunched holes for easy installation.
Lock bolts directly through the inner frame of case to prevent prying.
Foam lining on top and bottom protects and holds contents securely in place.
Sturdy fabricated steel construction with pry resistant clamshell design.
Available in textured semi-gloss black powder coated finish.
Continuous hinge is welded on one end to prevent pin removal.
Accented with silver logo design. Custom logos and colors are available upon request.
Model 2912-S can be mounted directly to any surface or attached with the optional Mounting Bracket for easy portability.

Shipping Weight 10 lbs.

This is a California-approved firearms safety device that meets the requirements of California Penal Code Section 12088 and the regulations issued thereunder.

  V-Line Slide-Away

Inner dimensions 9.5" x 10.75" x 3.25"
Outer dimensions 10" x 13" x 4"
Material: 12 ga steel
Lock: SIMPLES pushbutton mechanical lock
Shipping weight" 21 lbs.
 

• Heavy duty 12 ga. steel body, face and anti-pry brackets.
• Foam lined interior.
• Oversized pullout Drawer.
• Reliable Simplex mechanical pushbutton lock.
• Heavy duty spring assisted ball bearing slider with 100lb load rating.
• Rugged textured black powder coating.
• Optional removable Full or Half Trays for organizing valuables and computer tablets.
• Pre-punched holes for quick release mounting bracket (included).

This is a California-approved firearms safety device that meets the requirements of California Penal Code Section 12088 and the regulations issued thereunder.

Click here for brochure in PDF

  Desk Mate 2597-S

Inside dimensions 6½" x 8¼" x 1¾”
Outside dimensions door closed:  7½" x 10½" x 2½"
Outside dimensions with door open: 7½" x 11¾" x 4"
 

Designed to install under most surfaces with included Quick Release Mounting Bracket (MBDM).
Front opening case door drops down for easy access.
Desk Mate may also be installed sideways with the top bolted to the side of a surface and the door on the top.
Five button mechanical lock for quick access with 1081 possible combinations, easy to set a personalize code.
No keys to lose or batteries to change.
Felt Lined Tray (TDM) is included.  An additional TDM can also be ordered separately.
One Quick Release Mounting Bracket (MBDM) is included with each Desk Mate for easy installation under most surfaces.
Additional Quick Release Mounting Brackets may be ordered to allow the case to be used in more than one location.
3/8" thick steel lock block welded to cover guides and adds strength to the lock bolt.
The door is recessed for added pry protection.
Anti-Pry brackets in the interior provide additional strength and security.
Available in textured semi-gloss black powder coated finish.
Continuous hinge is welded on one end to prevent pin removal.
An optional Universal Mounting Bracket (UBDM) is available to enable the case to be installed on top of most surfaces.
Accented with silver logo design.

This is a California-approved firearms safety device that meets the requirements of California Penal Code Section 12088 and the regulations issued thereunder.

(extra tray includes shipping when ordered with DeskMate)

Travel Mate II

Model No. 279-IL BLK
Outer Dim: 9½” x 7¼” x 2”
Inner Dim: 8½” x 6½” x 1½”
Material: 18ga. Steel
Ship Wt. 5 lbs.

All V-Line Cases and Cabinets will be shipping with a two year supply of Cortec corrosion inhibitor!

The TravelMate II is identical in size to our Compact. It features an economical tubular key lock and is made with sturdy 18 ga. steel. The TravelMate ll is ideally designed for transporting valuables or a single firearm. Nicely finished in a textured low-gloss black powder coating the TravelMate II is accented with a silver V-Line logo. The foam interior helps protects your gun and/or valuables while in transit. The TravelMate II also features an elongated hole in the back right hand corner of the case to accommodate a cable lock or padlock for securing your case in your car or home.

• Single tubular key lock with two keys.
• Top opening security case with classic slim design.
• 3/8” thick steel lock block welded to cover guides and adds strength to the lock bolt.
• Elongated hole in the back allows a cable or pad lock to be used to secure the case to secure objects in your vehicle or home.
• Foam lining on top and bottom.
• Sturdy fabricated steel construction with pry resistant clamshell design.
• Finished in a tough textured low-gloss black powder coating.
• Continuous hinge is welded on one end to prevent pin removal.
• Accented with silver V-Line logo.

This is not a CA DOJ approved firearms safety device.

Travel Mate II

  Hide-Away 3912-SH

Inside dimensions: 11¾" x 7¾" x 2¼"
Outside dimensions:
    Door closed: 12¾" x 9¾" x 3½"
    Door open:  12¾" x 11¾" x 4¾"
 

Front opening security case features slide out felt lined drawer for easy access to contents.
One Quick Release Mounting Bracket (MB2912) is included with each Hide-Away for easy installation under most surfaces.
Additional Quick Release Mounting Brackets may be ordered to allow the case to be used in more than one location.
3/8" thick steel lock block welded to cover guides and adds strength to the lock bolt.
Five button mechanical lock for quick access with 1081 possible combinations, easy to set a personalize code.
No keys to lose or batteries to change.
The door is recessed for added pry protection.
Anti-Pry brackets in the interior provide additional strength and security.
Continuous hinge is welded on one end to prevent pin removal.
An optional Universal Mounting Bracket (UBHA) is available to enable the case to be installed on top of most surfaces.
Available in textured semi-gloss black powder coated finish.
Accented with silver logo design.

This is a California-approved firearms safety device that meets the requirements of California Penal Code Section 12088 and the regulations issued thereunder.

  The BRUTE

Model No. 1394-S-FBLK
Outer Dim: 12.5” x 9.5” x 3.6"
Inner Dim: 12” x 9” x 3.25"
Material: 10ga. Steel
Ship Wt. 23 lbs.
 

Click here for one page Vline
lock instructions in PDF

• Heavy duty 10 gauge all steel construction.
• Sleek custom anti-pry clamshell design.
• Heavy 12 gauge handle with anti-pry lock protection.
• Over-sized solid steel lock block and dead bolt.
• Break free 360° rotation clutch knob
• Reliable quick access mechanical push button lock.
• Heavy duty gas assisted opening strut.
• Heavy duty continuous hinge with welded pin.
• Fully customizable foam interior.
• Rugged textured tactical black powder coating.
• Silk screened and laser cut accent logos.
• Four pre-drilled holes for mounting.
• Pending CA DOJ approval.

  New QuickVault 41214-S Wall Safe

Inside dimensions: 13" x 11¼" x 2¼"
Outside dimensions:    14" x 12" x 3½"
Outside dimensions including frame: 17" x 15" x 3½"

 

Designed to install between the wall studs
Case mounts flush with the wall surface.
One adjustable felt lined shelf included. Additional shelves available.
Comes with one adjustable shelf and can accommodate 3 shelves
Five button mechanical lock for quick access with 1081 possible combinations.
3/8" thick steel lock block welded to cover guides and adds strength to the lock bolt.
Pre-punched holes for easy installation.
Lock bolts directly through the inner frame of case to prevent prying.
Felt lining in back, bottom and sides protects contents.
Sturdy fabricated steel construction with pry resistant clamshell design.
Available in textured semi-gloss ivory powder coated finish.
Continuous hinge is welded on one end to prevent pin removal.
Color - Ivory.  Accented with silver logo design.

Installation Instructions

This is a California-approved firearms safety device that meets the requirements
of California Penal Code Section 12088 and the regulations issued there-under

(includes shipping when ordered with QuickVault)

  Shotgun /Security Case 3842-SA

Inside dimensions: 40½"x 7”x 3"
Outside dimensions: 42"x 8"x 3½"

Shotgun Cases are designed to be mounted directly to your wall or floor. 
Great for use at home, office, RV or boat.
Top opening case.
Can be easily hidden in a closet or behind a door for best concealment.
Five button lock is mechanical and features a programmable combination.
Two tubular key locks have been added to the top and bottom for additional security when quick access is not required.
May be installed vertically or horizontally.
Holes are pre-punched on back for easy installation on top of most surfaces.
Large enough to accommodate most long guns.
Foam lined back, top, and bottom.
Velcro strap holds barrel in place and provides quick release.
Available in black only.
Does not meet the California standards
30 lbs

  Rifle /Security Case 31242-SA

Inner dimensions: 40½" x 11” x 3"
Outer dimensions: 42" x 12" x 3½"
 

Product Features:

Shotgun Cases are designed to be mounted directly to your wall or floor. 
Great for use at home, office, RV or boat.
Top opening case.
Can be easily hidden in a closet or behind a door for best concealment.
Five button lock is mechanical and features a programmable combination.
Two tubular key locks have been added to the top and bottom for additional security when quick access is not required.
May be installed vertically or horizontally.
Holes are pre-punched on back for easy installation on top of most surfaces.
Large enough to accommodate most long guns.
Foam lined back, top, and bottom.
Velcro strap holds barrel in place and provides quick release.
Available in black only.
Does not meet the California standards
38 lbs.

  Closet Vault II 51653-SA

Dimensions:
53" x 16 ¾" x 5 ¾" outside
50" x 13 ½" x 4 ¾" inside

V-Line's new Closet Vault II has been refitted with superior 3 point locking system. The two tubular locks are no longer necessary, which makes it one less step to open your safe and no lost keys! We think that you will like this new version of the “Closet Vault II

V-Line’s Closet Vault is designed to install in between the wall studs
The door and frame protrudes 2” to provide extra internal depth.
The Closet Vault is large enough to accommodate small household valuables, such as jewelry, cash, cameras, and firearms without taking up floor space.
The Closet Vault can be easily hidden in a closet or behind a door for best concealment.
The door fits flush into the frame of the Closet Vault to protect against a prying attack.
The push button lock is mechanical and features a programmable combination.
Three-point locking system
Shelving accessories are available to customize the Closet Vault to best meet individual needs.
Meets the California standards

 

Full Shelf FSCV
13½"x 4½"

Includes shipping when ordered with Closet Vault

Half Shelf HSCV
6"x 4½"

Includes shipping when ordered with Closet Vault

Peg Board Door Panel PBCV

Includes shipping when ordered with Closet Vault